Roofing 101: Here’s How To Improve Attic Ventilation

If you are looking for ways to improve your attic ventilation but don’t know where to start, this post can help you with that. Read on as we talk more about the tips and tricks to improving your attic ventilation and finding the perfect roofing contractor in Maryland.

Before a roofing contractor in Maryland gets to work, it’s your task to determine the vent types that your home needs. Keep in mind that these can also depend on your preference. The important thing is that this decision will impact your entire roofing project.

So, what are the different types of vents? Below you’ll find the 6 types of vents and how they are installed. With this information, you’ll be able to contact a roofing contractor in Maryland and tell them with confidence what needs to be done.

Soffit Vents

Soffit vents are considered to be one of the more popular vent types chosen by homeowners to improve their attic ventilation. Installing this type of vent starts with the size of the actual vent. The roofing contractor will then cut a hole between the rafters. Then, they will install it by screws.

Drip Edge Vents

This vent type is installed along the eaves. The waterproofing membrane is then installed on top of it. The best part about opting for this vent type is that it promotes waterproofing.

Ridge Vents

As the name suggests, ridge vents are installed along the ridges. This can come in one long piece or separate pieces. One of the main goals of ridge vents is that it allows an open area for warm air to escape the attic.

Static Vents

The first step in installing a static vent is driving a nail through the structure of your roof. Then, your roofing contractor will proceed to mark the necessary spots. This includes marking the guide hole, wherein they’ll remove the shingles around it. They will then slip the flange under the shingles and will proceed to secure it using nails.

Gable Vents

A gable vent is simply a slotted wood installed on the side of your home near the gable. If you’re looking for a vent type that functions both as an intake and exhaust, then this is recommended for you. This is installed on the exterior side of your house near the roof ridge rather than on the roof.

Turbine Vents

Turbine vent tends to draw air from inside of your attic. This pretty much functions like a wind turbine. To install this, your roofer will need to cut away the shingles and underlayment. Once a hole is cut, the vent is then installed and secured with plastic roof cement.

There are a lot of benefits to having good attic ventilation. For one, it lowers down your cooling bills. On the other hand, it also extends your roof’s shingle life, as well as reduces winter ice dams. With this guide and a proper roofing contractor in Maryland, you’ll soon experience these benefits and more!

At WF Schmidt Construction Company we only use the best materials and techniques to make sure we meet and exceed your needs. This is why we’re the top roofing contractor in Maryland today.